水上游樂設備前一種水滑梯設備是供游人滑行的設備，其結構的安全性、穩定性非常重要。那么水上滑梯設備怎么設計符合相關標準？水上滑梯生產廠家為您講解。

The water slide equipment before the water amusement equipment is the equipment for tourists to slide, and the safety and stability of its structure are very important. How can the water slide equipment be designed to meet relevant standards? The water slide manufacturer will explain for you.

水上樂園設備中的水上游樂設施，屬于特種設備的范疇，等級為B級，每套設備均要經過特種設備檢測院的檢查、檢測和驗收，出具合格證后方可使用。水滑梯設備大部分安裝在室外，自然環境對滑梯結構的影響很大。

The water amusement facilities in the equipment of the water park belong to the category of special equipment, with a grade of B. each set of equipment must be inspected, tested and accepted by the special equipment testing institute, and can be used only after a certificate of conformity is issued. Most of the water slide equipment is installed outdoors, and the natural environment has a great impact on the slide structure.

因此，在水滑梯設計階段，須對其結構進行強度、剛度、疲勞強度、穩定性、抗傾覆性和防側滑性計算分析，達到相應規范要求的安全系數，編寫正規的計算說明書，并有特種設備檢測院具有相應資質的工程師審核，出具鑒定報告后方能投產，首套設備須由特種設備檢測院專業的、具有相應資質的工程師現場檢驗，出具型式試驗報告后方能使用和批量生產。

Therefore, in the design stage of the water slide, the strength, stiffness, fatigue strength, stability, anti overturning and anti sideslip of its structure must be calculated and analyzed to meet the safety factor required by the corresponding specifications, and the formal calculation instructions must be prepared. The first set of equipment must be professional Engineers with corresponding qualifications shall conduct on-site inspection and issue type test reports before use and mass production.

對于水上樂園設備中水滑梯設備結構進行計算分析時，須考慮荷載、活荷載、風荷載、雪荷載、地震荷載和沖擊荷載。荷載在水滑梯設備中一般為話題的自重；活荷載只乘坐人本身的荷載和水荷載；風荷載分為工作狀態荷載和非工作狀態荷載，游樂設施的設計中按運行風速15m/s計算工作狀態的風荷載，非工作狀態按設備安裝地50年一遇的風荷載計算；

Load, live load, wind load, snow load, seismic load and impact load shall be considered when calculating and analyzing the water slide equipment structure of the water park equipment. The load in the water slide equipment is generally the self weight of the topic; The live load is only the load of the occupant and the water load; The wind load is divided into working state load and non working state load. In the design of amusement facilities, the wind load in working state is calculated according to the operating wind speed of 15m / s, and that in non working state is calculated according to the wind load once in 50 years in the place where the equipment is installed;

雪荷載按設備安裝地50年一遇的風荷載計算；計算地震荷載時，按設防烈度8度，相當于設計基本加速度0.2g計算；計算沖擊荷載時，游樂設施在運動過程中有可能出現沖擊，設計時一般無法準確計算。因此，在進行強度計算時，其荷載和活荷載須乘以沖擊系數，在水滑梯設備中根據其速度，選用沖擊系數相應的沖擊系數。

The snow load is calculated according to the wind load once in 50 years at the equipment installation site; When calculating the seismic load, it is calculated according to the fortification intensity of 8 degrees, which is equivalent to the design basic acceleration of 0.2g; When calculating the impact load, the amusement ride may have impact during its movement, which can not be calculated accurately in design. Therefore, in strength calculation, the load and live load must be multiplied by the impact coefficient. In water slide equipment, the impact coefficient corresponding to the impact coefficient is selected according to its speed.

水上樂園設備中水滑梯結構包括玻璃鋼滑道、鋼結構、混凝土基礎三大部分。鑒于水滑梯設備結構的特殊性、重要性、復雜性、在水滑梯結構分析上引入有限元方法，有限元法適用于水滑梯設備中的各種復雜機構，成為了行之有效的分析手段之一。引入后，改變了傳統分析法，是受力分析更準確、更多面，更有利于水滑梯結構校核和設計優化。

The water slide structure of the water park equipment includes three parts: FRP slide, steel structure and concrete foundation. In view of the particularity, importance and complexity of the structure of the water slide equipment, the finite element method is introduced into the analysis of the water slide structure. The finite element method is applicable to various complex mechanisms in the water slide equipment and has become one of the effective analysis methods. After the introduction, the traditional analysis method is changed, and the stress analysis is more accurate and more faceted, which is more conducive to the structural check and design optimization of the water slide.

水滑梯是水上樂園必不可少的一個水上游樂的項目，一般水上樂園設施的廠家通常是使用玻璃鋼進行水滑梯制作，且其制作一定要符合國家有關標準，這樣才能保證水上樂園設備的質量。更多設備的認識就來我們網站http://www.979yy.cn了解吧！

The water slide is an indispensable water amusement project in the water park. Generally, the manufacturers of water park facilities usually use glass fiber reinforced plastic to make water slides, and the production must conform to the relevant national standards, so as to ensure the quality of water park equipment. For more information about equipment, please visit our website http://www.979yy.cn Understand!