循環水泵也是平時較為常見的水泵之一，今天室內水上樂園設備廠商就來講講它的檢修內容，這樣才能夠在水泵出問題的時候更好的進行故障的排查。

The circulating water pump is also one of the more common pumps. Today, the manufacturer of indoor water park equipment will talk about its maintenance, so that it can better troubleshoot when the water pump has problems.

1、將循環水泵進行拆卸。

1. Disassemble the circulating water pump.

2、做好循環水泵檢修時須的安全措施。

2. Take safety measures for maintenance of circulating water pump.

3、拆除循環水泵進出口相連的管路，做好連接處的相應記錄工作。

3. Remove the pipelines connecting the inlet and outlet of the circulating water pump, and make corresponding records at the connections.

4、拆掉電機機座連接螺栓并且做好記錄工作。

4. Remove the connecting bolts of the motor base and make records.

5、拆掉泵蓋和泵體的連接螺栓。

5. Remove the connecting bolts between the pump cover and the pump body.

6、把電機連同葉輪一起吊出泵體，注意不能損壞葉輪。

6. Lift the motor and impeller out of the pump body, and be careful not to damage the impeller.

7、把葉輪右旋緊螺母擰掉。用拉馬把葉輪緩慢拉出，將傳動鍵取下，注意不能損壞葉輪與傳動鍵。

7. Unscrew the right tightening nut of the impeller. Use puller to slowly pull out the impeller and take down the drive key. Be careful not to damage the impeller and drive key.

8、用手把泵軸機械密封緩慢取出，拆掉泵蓋和電機連接螺栓，把泵蓋和擋水圈輕輕取下。

8. Take out the mechanical seal of pump shaft slowly by hand, remove the connecting bolts of pump cover and motor, and gently remove the pump cover and water retaining ring.

9、對循環水泵進行清洗檢查并且維修處理。

9. Clean, check and repair the circulating water pump.

循環水泵在使用期間的九大檢修要點就是這樣了，您對此有什么想了解的內容就來我們網站http://www.979yy.cn咨詢吧！

This is the nine major maintenance points of the circulating water pump during its use. If you want to know anything about this, please come to our website http://www.979yy.cn Consult!